System Settings
From here you can adjust settings concerning your TV.
TV Screen Format: Select your TV screen format.
The 4:3 format is the standard format for most TV screens.
Select 16:9 for a wide screen TV.
Output Selection: If the teletext function does not work when watching channels from an analogue satellite receiver
connected to the Mediamaster, change this setting from “RGB” to “Composite”.
UHF Channel Number: Select this alternative if you have to change the RF channel.
If you change the RF channel number, you must also change it to the same value on the TV. If you do not, the picture will become black.
RF Modulator Type: If the Mediamaster is connected to the TV by an RF cable, you can select the RF modulator type. The RF Modulator affects a channel’s audio. If you get picture but no sound, the RF modulator selection might be wrong. Select “UK (PAL I)” if the Mediamaster is used in the UK.
Select “Normal” if it is used elsewhere.
Information Box Timeout (secs): When you switch channels, an information banner will be shown for a few seconds. You can select for how long the banner will be shown.
Display Volume Indicator: Select whether or not you want the volume bar to appear on the screen when you change the volume.
Date Setting (dd/mm/yyyy): Used to set the current date, month and year.
Time Setting: Adjust the clock.
GMT Offset: Adjust the time difference in your country.
On/Off Timer Setting
You can enjoy this On/Off Timer for such a convenience as
You may specify up to 8 separate lists with
GB 23
