Nokia N96 manual 165, Select Options Advanced settings and from the following

of the access point groups, select an access point marked with , and select Edit.

Follow the instructions from your service provider. Select from the following:

●Access point name — You obtain the access point name from your service provider.

●User name — The user name may be needed to make a data connection, and is usually provided by the service provider.

●Prompt password — If you must enter the password every time you log in to a server, or if you do not want to save your password in the device, select Yes.

●Password — A password may be needed to make a data connection and is usually provided by the service provider.

●Authentication — Select Secure to always send your password encrypted or Normal to send your password encrypted when possible.

●Homepage — Depending on the access point you are setting up, enter the web address or the address of the multimedia message centre.

Select Options > Advanced settings and from the following:

●Network type — Select the internet protocol type to transfer data to and from your device. The other settings depend on the selected network type.

●Phone IP address (for IPv4 only) — Enter the IP address of your device.

●DNS addresses — Enter the IP addresses of the primary and secondary DNS servers, if required by your service provider. To obtain these addresses, contact your internet service provider.

●Proxy server address — Enter the address of the proxy server.

●Proxy port number — Enter the port number of the proxy server.

WLAN internet access points Press , and select Tools > Settings > Connection > Destinations > New access point,

and follow the instructions on the screen. Or, open one of the access point groups, select an access point marked with , and select Edit.

Follow the instructions from your WLAN service provider.

●WLAN network name — Select Enter manually or Search for networks. If you select an existing network, WLAN network mode and WLAN security mode are determined by the settings of its access point device.

●Network status — Define whether the network name is displayed.

●WLAN network mode — Select Ad-hoc to create an ad hoc network and to allow devices to send and receive data directly; a WLAN access point device is

Settings

165