Nokia Series 60 manual List types, Scrolling indicator for grids, Menu list

Horizontally scrolling grids may be used when the application design requires it. For them, the browsing rules are applied by exchanging the horizontal and vertical browsing rules. The example figures presented above are correct if turned 90 degrees counter-clockwise.

Scrolling indicator for grids

The same scrolling indicator as with lists is applied to vertically scrolling grids. The indicator refers to the row where the focus is located; left-right movement within the row has no effect on the indicator.

For horizontally scrolling grids, the indicator appears as rotated 90 degrees, and refers to the current column.

List types

Based on the functionality, the following list categories can be identified:

￿￿Menu list

￿￿Selection list

￿￿Markable list

￿￿Multi-selection list

￿￿Setting list

￿￿Form

Lists belonging to one category may have different graphical appearances. See section List layouts for information about different-looking list items.

Menu list

Menu lists are used to select one item from a list and do nothing else; the Options command is not available when a menu list is being browsed. (Options menu itself is a menu list.)

If a high-priority event like an incoming call happens when a menu list is open, the list is cancelled and the new event takes control. These lists are often displayed inside a pop-up window.

Default keypad functions during a menu list:

Scroll up / down	move focus the list
Scroll left / right	ignored (unless there is a submenu; see section
	Options menu)
Select key	select the item, do associated function
	30