Properly, View | NordicTrack 831.2988 specification

6.SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION

a.Remove the screws from the hood. Carefully remove the hood. Locate the Reed Switch (74) and the Magnet (95) on the left side of the Pulley (17). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that there is a 1/8"gap between the Magnet and the Reed Switch. If necessary, loosen the Screw (90) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few min- utes to check for a correct speed reading.

PROPERLY

II

I

__118"--

9o __

Top

View

m

17

Image 17

NordicTrack 831.2988 user manual Symptom the Displays of the Console do not Function, Properly, View

Contents

Model No Serial No Questions?Customer HOT Line Mon.-Fri., 6 a.m.-6 p.m. MST For future reference Table of Contents Important Precautions Treadmill There is one decal Play on or around Foot Rails Before You Begin Assembly Performant Lube TM Walking Belt HOW to Plug in the Power CordTreadmill Operation Features of the Console Diagram of the Console Select the Manual mode Plug in the power cordLa Insert the key fully into the console Change the incline of the treadmill if desired INCLINE/DISTANCE display Speed display START/ENTER Page HOW to Move the Treadmill HOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Symptom the Power Turns OFF During USE Maintenance and Trouble-shootingSymptom the Power does not Turn on Erly tightened Symptom the Walking Belt is OFF-CENTER When Walked onSymptom the Walking Belt Slows When Walked on View Symptom the Displays of the Console do not FunctionProperly Target Heart Rate Zones Conditioning GuidelinesFactors in a Sensible Diet Stretch after your warm-up Warm up before you begin Benefits of Aerobic Exercise Hea Rate Intensity Front Roller Qty Description Ordering Replacement Parts 6690 Exploded Drawing--Model No Limited Warranty