NordicTrack NCTL15991 Problem The walking belt slows when walked on, Power Cord, Move the key

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a CUL-listed surge protector, rated at 15 amps, with a 1mm ft.) or less in length.

b. If the walking belt is overtightened, treadmill perfor-
mance may decrease and the walking belt may be-
come damaged. Remove the key and		UNPLUG THE
POWER CORD	. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 7–10 cm (3–4 in.) off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes.

Repeat until the walking belt is properly tightened.

2 (14-gauge) cord of 1,5 m (5

b

7-10 cm

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department.

PROBLEM: The walking belt is off-centre or slips when walked on

SOLUTION:	a. If the walking belt has shifted to the left,			first re-
	move the key and		UNPLUG THE POWER CORD	.
	Using the allen wrench, turn the left rear roller bolt
	clockwise 1/2 of a turn. Be careful not to overtighten
	the walking belt.		If the walking belt has shifted to
	the right,	turn the left rear roller bolt counterclockwise
	1/2 of a turn. Plug in the power cord, insert the key
	and run the treadmill for a few minutes. Repeat until
	the walking belt is centered.
	b. If the walking belt slips when walked on, first remove
	the key and		UNPLUG THE POWER CORD	. Using
	the allen wrench, turn both rear roller adjustment
	bolts clockwise, 1/4 of a turn. When the walking belt
	is correctly tightened, you should be able to lift each
	side of the walking belt 7–10 cm (3–4 in.) off the
	walking platform. Be careful to keep the walking belt
	centred. Plug in the power cord, insert the key and
	carefully walk on the treadmill for a few minutes.
	Repeat until the walking belt is properly tightened.

a

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:	a. With the key in the console, press one of the Incline buttons.		While the incline is changing, re-
	move the key.	After a few seconds, re-insert the key. The treadmill will automatically rise to the
	maximum incline level and then return to the minimum level. This will recalibrate the incline system.

27