NordicTrack NCTL15991 user manual Assembly requires two people

ASSEMBLY

Assembly requires two people.	Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed.		Assembly requires the included allen wrench
and your own phillips screwdriver	and wire cutters	.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the		1
Uprights (69) until the treadmill is in the position shown.
Insert one of the Extension Legs (102) into the treadmill
as shown in the inset drawing. Make sure that the			69
Extension Leg is turned so the Base Pad (99) is on the
bottom. Note: It may be helpful to tip the Uprights (69)
forward as you insert the Extension Leg.
Insert the other Extension Leg (not shown) in the same				69
way.
				102
				99
2. Press the Lock Knob Sleeve (70) into the left Upright (69).		2
Make sure that the Lock Pin Collar (72) and the Spring
(71) are on the Lock Pin (74). Insert the Lock Pin into the
left Upright (69). Press the Lock Knob Spacer (117) onto
left Upright. Tighten the Lock Knob (68) onto the Lock				69
Pin.
		68
				70
			117	71
				72
				74
3. With the help of a second person, tip the Uprights (69)		3
down as shown.	Make sure that the Extension Legs
(102) remain in the Uprights.
Attach each Extension Leg (102) with two Screws (100)			99
as shown.
With the help of a second person, carefully tip the			Frame
Uprights (69) back to the vertical position.				69
		69
				100
			100	102
		99
			102
6