HOW TO USE RESISTANCE AND PACE
PROGRAMS
1 |
| Press | any button on the console or begin | |
| pedaling to turn on the console. | |||
|
| |||
|
| See step 1 on page 9. | ||
|
| Select | one of the six resistance and pace | |
2 | ||||
| programs. | |||
| ||||
When the power is turned on, the man- ual mode will be selected. To select a resistance and pace program, press the
Program Select but-
ton repeatedly until a “P 1,” “P 2,” “P 3,” “P 4,” “P 5,” or “P 6” appears in the right display.
Each program is divided into several time seg- ments of different lengths. One resistance setting and one pace setting are programmed for each segment. (Note: The same resistance setting and/or pace setting may be programmed for two or
more consecutive segments.) | The resistance set- | |
ting for the first seg- |
| |
ment is shown in the | Current Segment | |
left column of the | ||
| ||
matrix. The resis- |
| |
tance settings for |
| |
the next five seg- |
| |
ments are shown in |
| |
the columns to the |
| |
right. Note: One bar |
|
in a column represents a resistance setting of level 1, two bars represent level 2 or 3, three bars represent level 4 or 5, four bars represent level 6 or 7, five bars represent level 8 or 9, and six bars represent level 10.
Press the Program Start button or begin
3 pedaling to start the program.
When the program is started, the left column of the matrix will begin to flash, and the elliptical exerciser will automatically adjust to the resis- tance setting for the first segment.
As you exercise, the Training Zone bar will help you to keep your pedaling pace near the pace
11
setting for the cur- |
|
| a |
|
|
|
|
|
|
|
rent segment. The |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
lit indicators in the |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
bar will show your |
|
|
|
|
|
|
|
|
|
|
actual pace. If an |
|
|
|
|
|
|
|
|
|
|
indicator to the |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
right of the lit indi- |
|
|
|
|
|
|
|
|
|
|
cators is flashing |
|
| b |
|
|
|
|
|
|
|
(see drawing a), |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
increase your |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
pace. If an indica- |
|
|
|
|
|
|
|
|
|
|
tor to the left of |
|
|
|
|
|
|
|
|
|
|
any lit indicator is |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
flashing (see draw- |
|
|
|
|
|
|
|
|
|
|
ing b), decrease your pace. When no indicator is |
|
| ||||||||
flashing, your pace matches the pace setting for |
|
| ||||||||
the current segment. | Important: The pace set- |
|
| |||||||
tings are intended only to provide motivation. |
|
| ||||||||
Your actual pace may be slower than the cur- |
|
| ||||||||
rent pace setting. Make sure to exercise at a |
|
| ||||||||
pace that is comfortable for you. |
|
| ||||||||
When the first segment of the program ends, a |
|
| ||||||||
series of tones will sound and |
|
|
|
|
| all resistance set- | ||||
tings will move one column to the left. | The resis- | |||||||||
tance setting for the second segment will then be |
|
| ||||||||
shown in the left column of the matrix and the |
|
| ||||||||
resistance of the elliptical exerciser will automati- |
|
| ||||||||
cally change to the resistance setting for the sec- |
|
| ||||||||
ond segment. |
|
|
|
|
|
|
|
|
|
|
Note: During the program, you can override the resistance setting, if desired, by pressing the Resistance buttons. However, when the next segment begins, the resistance will change if a different resistance setting is programmed for the next segment.
If you stop pedaling for several seconds, a tone will sound and the program will pause. To restart the program, simply resume pedaling. The pro- gram will continue until the resistance setting for the last segment is shown in the left column of the matrix and the last segment ends.
4 Monitor your progress with the two displays.
See step 4 on page 9.
5 Measure your heart rate if desired.
See step 5 on page 10.
