3.Identify the Left and Right Upright Covers (20, 21), which are marked with “L” and “R” stickers, and orient them as shown.
Attach the Left and Right Upright Covers (20,
21)around the Upright (2) with four M4 x 30mm Screws (74).
Insert the Clip (85) into the underside of the Left and Right Upright Covers (20, 21).
4.Apply a generous amount of the included grease to the right axle on the Upright (2). Then, apply a small amount of grease to a 23mm x 19mm Wave Washer (76). Slide the Wave Washer onto the axle on the Upright.
Identify the Right Handlebar Leg (13), which is marked with an “R” sticker, and orient it as shown. Slide the Right Handlebar Leg onto the axle on the Upright (2). Attach the Right Handlebar Leg with an M10 x 19mm Patch Screw (61) and an M10 Washer (64).
Attach the Left Handlebar Leg (12) in the same way.
3 |
|
|
74 |
|
|
20 |
| 2 |
|
| |
| 85 | 74 |
|
| |
|
| 21 |
4 |
|
|
12 | 2 | Grease |
|
| 13 |
| 76 | 64 |
| 61 | |
|
|
7
