5.Identify the Right Pedal Arm (15), which is marked with an “R” sticker. Attach a Pedal (9) to the Right Pedal Arm with four M6 x 13mm Patch Screws (78).
Attach the other Pedal to the Left Pedal Arm (not shown) in the same way.
6.Identify the Left Pedal Arm (14), which is marked with an “L” sticker, and orient it as shown. Apply a small amount of grease to the axle of the Left Pedal Arm and to a 23mm x 19mm Wave Washer (76).
Slide the 23mm x 19mm Wave Washer (76) onto the Left Pedal Arm (14). Position the Left Handlebar Leg (12) as shown. Then, insert the Left Pedal Arm into the Left Handlebar Leg. Attach the Left Pedal Arm with an M10 x 19mm Patch Screw (61), a Pedal Axle Cover (39), and an M10 Washer (64). Do not overtighten the
Patch Screw; the Left Pedal Arm must pivot easily.
Attach the Right Pedal Arm (not shown) in the same way.
5 |
|
|
9 |
|
|
| 15 |
|
78 |
|
|
6 |
|
|
| 12 |
|
61 | 64 |
|
39 | 76 | Grease |
|
| |
14 |
| |
8
