MAINTENANCE AND TROUBLESHOOTING
For smooth |
|
operation of |
|
the elliptical |
|
crosstrainer, | Incline |
the incline | |
ramp should be | Ramp |
kept clean. | Wheel |
Using a soft | |
cloth and mild |
|
detergent, |
|
clean dust and |
|
other residue |
|
from the incline |
|
ramp where the wheels make contact with it. Other parts of the elliptical crosstrainer can also be cleaned in this manner. Never use abrasives or solvents.
Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately.
CALIBRATING THE RESISTANCE AND INCLINE SYSTEMS
If the elliptical crosstrainer’s resistance or incline sys- tem is not working properly, you may need to activate the calibration process.
To activate the resistance calibration process, press the lowest RESISTANCE button. Wait for the resistance motor to stop. Next, press the highest RESISTANCE button. While the resistance motor is running, unplug the power cord from the wall. Wait for a few seconds and then plug the power cord back in. The resistance system will now calibrate itself. It will not need to be calibrated again.
To activate the incline calibration process, press the lowest RAMP ANGLE button. Wait for the incline motor to stop. Next, press the highest RAMP ANGLE button. While the incline motor is running, unplug the power cord. Wait for a few seconds and then plug the power cord back in. The incline system will now cali- brate itself. It will not need to be calibrated again.
19
