NordicTrack NTEL12900 user manual Assembly, Wrench A rubber mallet

ASSEMBLY

Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included allen wrenches, assembly requires a phillips screwdriver			, an adjustable
wrench	, and a rubber mallet	.

As you assemble the elliptical crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been pre-assembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled.

M8 Split	M8 Washer (33)–4	Chrome Tube	M10 Split
Washer (58)–4		Washer (44)–2	Washer (13)–3
Pedal Screw (43)–6	Incline Axle	Console Screw (35)–4	M10 x 25mm Screw (100)–3
	Screw (30)–4
	Rear Stabilizer Bolt (60)–2
Front Stabilizer Bolt (86)–2
		56mm Spacer (22)–2
M10 Nylon
Locknut (26)–6	3/4” Axle Cap (61)–2		Plastic Pedal
			Spacer (85)–2
		5