NordicTrack NTEL4255.1 user manual Assembly, Cluded hex keys and your own adjustable wrench

ASSEMBLY

Assembly requires two persons. Set the elliptical exerciser in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly can be completed using the in-

cluded hex keys and your own adjustable wrench .

Use the drawings below to identify the small parts used for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 24. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled.

M8 Small	M10 Split	Wave Washer	M10 Washer	M8 Washer
Washer (18)–4	Washer (85)–20	(88)–4	(67)–14	(69)–4
M4 x 16mm	M4 x 19mm	M8 x 19mm Button	M8 Nylon	M10 Nylon
Screw (47)–6	Screw (57)–2	Screw (56)–4	Locknut (72)–4	Locknut (70)–2
M8 x 38mm Button		M8 x 55mm Bolt		M10 x 13mm Button
Bolt (58)–4		Set (92)–2		Screw (54)–14
M10 x 25mm Patch		M10 x 65mm Bolt
Screw (48)–4			Set (94)–2
	M10 x 116mm Carriage Bolt (38)–2
	M10 x 123mm Button Screw (87)–2			Thrust Washer
				(66)–4
		5