1. Make sure that the power cord is unplugged.

1

 

 

 

 

 

With the help of a second person, carefully tip

 

 

B

 

 

A

the treadmill onto its left side. Partially fold the

 

 

 

Frame (56) so that the treadmill is more stable;

 

 

Hole

do not fully fold the Frame yet.

 

 

 

38

83

 

 

Remove and discard the two indicated bolts (A)

 

 

 

and the shipping bracket (B).

 

 

81

Cut the tie securing the Upright Wire (38) to the

 

 

 

Base (83). Locate the tie in the indicated hole in

 

 

2

the Base, and use the tie to pull the Upright Wire

 

 

 

out of the hole.

 

 

 

Attach a Base Pad (81) to the Base (83) in the

 

13

 

location shown with a Base Pad Spacer (13) and

56

 

a #8 x 1" Tek Screw (2). Then, attach another

81

 

 

2

 

Base Pad (81) with only a #8 x 1" Tek Screw (2).

 

 

 

 

 

2. Remove the 3/8" Nut (8), the 3/8" x 2" Bolt (4),

2

 

 

and the shipping bracket (C) from the Base (83).

 

 

 

 

 

Attach a Wheel (84) with the Bolt and the Nut

 

 

 

that you just removed. Do not overtighten the

 

 

 

Nut; the Wheel must turn freely. Discard the

 

83

 

shipping bracket.

 

 

 

 

 

 

 

4

 

 

 

84

 

 

 

C

 

 

 

8

 

3. Identify the Right Upright (78) and the Right

3

 

 

Upright Spacer (79), which are marked with

 

 

38

 

78

stickers. Insert the Upright Wire (38) through the

 

 

 

 

 

 

Right Upright Spacer as shown. Set the Spacer

 

 

 

on the Base (83).

 

 

 

 

 

Wire Tie

38

See the inset drawing. Tie the wire tie in the

 

79

 

 

Right Upright (78) securely around the end of

 

 

 

 

83

the Upright Wire (38). Be sure that the wire tie

 

 

goes through the indicated hole in the Right

 

 

 

Upright.

 

 

 

With the help of a second person, hold the Right

 

 

 

Upright (78) near the Base (83). Then, pull the

 

78

 

other end of the wire tie until the Upright Wire

 

 

 

Hole

 

(38) is routed completely through the Right

 

 

 

 

 

Upright.

38

Wire

 

 

 

 

 

Tie

 

 

7

 

 

Page 7
Image 7
NordicTrack NTL09107.0 user manual Make sure that the power cord is unplugged, Do not fully fold the Frame yet