7 Turn on the fan if desired.

To turn on the fan at low speed, press the AutoBreeze Fans button; the number 1 will appear below the word “Fan” in

the display. To turn on

the fan at medium speed, press the button a sec- ond time; the number 2 will appear in the display. To turn on the fan at high speed, press the button a third time; the number 3 will appear in the dis- play. To select the auto mode, press the button again; the word “Auto” will appear in the display. When the auto mode is selected, the speed of the fan will automatically increase and decrease as the speed of the walking belt increases and de- creases.

To turn off the fan, press the AutoBreeze Fan but- ton again. Note: A few minutes after the walking belt is stopped, the fan will automatically turn off.

8 Whenkey. you are finished exercising, remove the

Step onto the foot rails, press the Stop button, and adjust the incline of the treadmill to the lowest setting. The incline must be at the lowest setting when the treadmill is folded to the storage posi- tion or the treadmill will be damaged. Next, re- move the key from the console and put it in a se- cure place. Note: If the display remains lit after the key is removed, the console is in the “demo” mode. See page 23 and turn off the demo mode.

When you are finished using the treadmill, switch the reset/off circuit breaker to the off position and unplug the power cord.

14

Page 14
Image 14
NordicTrack NTL1095.3 user manual Turn on the fan if desired, Whenkey. you are finished exercising, remove