NordicTrack NTL15008.5 Make sure that the power cord is unplugged, Overtighten the Tek Screws

1. Make sure that the power cord is unplugged.	1
With the help of a second person, tip the incline					79
trainer onto its left side. Have the second person							80
hold the incline trainer to prevent it from tipping.
Attach the four Base Feet (80) and the four							2
Base Foot Spacers (79) to the Base (78) with
four #8 x 1" Tek Screws (2). Be careful not to
overtighten the Tek Screws.		79 80
		2
		78		79	80		2
	79	80 2
2. Hold the Upright (74) near the incline trainer,	2				74
with the brackets on the Upright oriented as
shown.
See the inset drawing. Tie the wire tie in the	72				Wire
Upright (74) around the end of the Upright Wire			72
(72). Then, pull the other end of the wire tie until		74				Tie
the Upright Wire is routed completely through
the Upright.	Bracket
Attach the Upright (74) to the Base (78) with	Wire
four 3/8" x 3 1/2" Bolts (3) and four 3/8" Star
Washers (9). Start all four Bolts before tight-	Tie				3
ening any of them. Be careful not to pinch			9
the Upright Wire (72).
		78	9	3
	7