10.Attach the Console (84) to the plate on the Yoke (88) with four #8 x 3/4" Screws (1). Be careful not to pinch any wires. Start all four Screws before tightening any of them. Do not over- tighten the Screws.
11.Attach the Console Cover (73) to the top of the Upright (74) with two #8 x 1/2" Screws (12). Do not overtighten the Screws.
10 | 84 |
|
|
| 88 |
| 1 |
|
|
| |
| 1 |
|
|
11 |
|
|
|
|
| 73 | 12 |
|
|
|
74
12.Make sure that all parts are properly tightened before you use the incline trainer. Keep the included hex keys in a secure place. One of the hex keys is used to adjust the walking belt (see pages 22 and 23). To pro- tect the floor or carpet from damage, place a mat under the incline trainer.
11
