HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs speakers, you must connect your MP3 player, CD player, or other personal audio player to the console. Locate the audio wire. Plug one end into the audio jack on the side of the console. Plug the other end into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Then, adjust the volume level on your personal audio player or press the Vol increase and decrease buttons on the console. If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
HOW TO USE THE SETTINGS MODE
The console features a settings mode that allows you to connect your treadmill to your own wireless network and to log in to your iFit Live account. The settings mode also allows you to turn on and turn off the dis- play demo mode. You may also be able to select the unit of measurement.
1.Select the settings mode.
Insert the key into the console (see step 1 on page 13). Next, select the start menu (see step 2 on page 13). Then, press the i button in the lower right corner of the screen to select the settings mode.
2.Select the wireless network mode.
Press the Wireless Network button on the screen.
You must have your own wireless network and an 802.11b router with SSID broadcast enabled (hid- den networks are not supported).
If your wireless network is unencrypted and does not require a password, go to step 2a. If your wireless network is encrypted and re- quires a password, go to step 2b.
2a. Connect your treadmill to an unencrypted wireless network.
Select the desired wireless network and press the Connect button. When the Disconnect button ap- pears, your exercise equipment is connected to the wireless network. Then, press the Done button. Go to step 3.
2b. Connect your treadmill to an encrypted wireless network.
To connect to your encrypted network, you will need to know your network SSID (network name), network encryption type, and network password. Select the desired wireless network and press the Advanced button. If your network is encrypted, you must press the Use Encryption button and fill in the entry boxes. If desired, you may also set a static IP address and/or a static domain name server (DNS). To use encryption, press the Use Encryption but- ton. Select the encryption type and enter the pass- word. When you are finished, press the Submit button. To return to the advanced settings screen, press the Cancel button.
To use numbers or other characters on the key- board on the screen, press the .?123 button or the #+= button. To return to the letter keyboard, press the ABC button. To capitalize a character, press the button with an
20
