Connecting 21
Wired network setup | Advanced Setting |
If there is a DHCP server on the local area network (LAN) via wired connection, this player will automatically be allocated an IP address. After making the physical connection, a small number of home networks may require the player’s network setting to be adjusted. Adjust the [NETWORK] setting as follow.
Preparation
Before setting the wired network, you need to connect the broadband internet to your home network.
1.Select [Connection Setting] option in the [Settings] menu then press ENTER (b).
2.Read the preparations for the network settings and then press ENTER (b) while [Start] is highlighted.
Network will automatically be connected to the unit.
If you want to set the network settings manually, use W/Sto select [Advanced Setting] on the [Network Setting] menu and press ENTER (b).
1.Use W/Sto select [Wired] and press ENTER (b).
2.Use W/S/A/Dto select the IP mode between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP address automatically.
,,Note
If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/ A/Dand numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
3.Select [Next] and press ENTER (b) to apply network settings.
Network connection status is displayed on the screen.
4.Press ENTER (b) while [OK] is highlighted to finish the wired network settings.
2
Connecting
