Sears BH9430PW, BH9431PW Radio Operations, Listening to the radio, Presetting the Radio Stations

Operating 57

Radio Operations Deleting a saved station

Be sure that the antenna is connected. (Refer to the page 17)

Listening to the radio

1.Press FUNCTION until TUNER (FM) appears in the display window. The last received station is tuned in.

2.Press and hold TUNING (-/+) for about two seconds until the frequency indication starts to change. Scanning stops when the unit tunes in a station. Or Press TUNING (-/+) repeatedly.

3.Adjust the volume by pressing VOL (+/-).

Presetting the Radio Stations

You can preset 50 stations for FM.

Before tuning, make sure that you have turned down the volume.

1.Press FUNCTION until the TUNER (FM) appears in the display window.

2.Select the desired frequency by using TUNING (-/+).

3.Press ENTER (b) a preset number will flash in the display window.

4.Press PRESET (-/+) to select the preset number you want.

5.Press ENTER (b). The station is stored.

6.Repeat the steps 2 to 5 to store other stations.

1.Press PRESET (- / +) to select a preset number you want to delete.

2.Press CLEAR, the preset number will blink in the display window.

3.Press CLEAR again, to delete the selected preset number.

Deleting all the saved stations

Press and hold CLEAR for two seconds.

“ERASE ALL” will flash up. Press CLEAR again. Then all the saved stations are deleted.

Improving poor FM reception

Press B (blue) (MONO/STEREO) colored button on the remote control. This will change the tuner from stereo to mono and usually improve the reception.

4

Operating