Connecting 17
,,Note
yy If your TV does not accept the resolution you have set on the player, you can set resolution to 480p as follows:
1.Press HOME (
) to disappear the HOME menu.
2.Press Z(STOP) for more than 5 seconds.
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto].
yy If you select a resolution that your TV does not accept, the warning message will appear. After resolution change,
if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution.
yy The 1080p video output frame rate may be automatically set to either 24 Hz or
60 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the
Antenna connection
Connect the supplied antenna for listening to the radio.
Rear of the unit
,,Note
After connecting the FM wire antenna, be sure to fully extend it.
2
Connecting
