NordicTrack NTS79020 user manual 105

14.Wrap the High Cable (63) over a 3 1/2” Pulley (56). Attach the Pulley to the indicated bracket on the Top Frame (5) with an M10 x 46mm Button Head Bolt (76) and an M10 Nylon Locknut (101).

15.Wrap the High Cable (63) over a 3 1/2” Pulley (56). Attach the Pulley to the indicated bracket on the Top Frame (5) with an M10 x 46mm Button Head Bolt (76) and an M10 Nylon Locknut (101).

16.Wrap the High Cable (63) under a 3 1/2” Pulley (56). Attach the Pulley and a Cable Trap (105) between the second set of holes from the top of the pair of Long Pulley Plates (59) with an M10 x 46mm Button Head Bolt (76) and an M10 Nylon Locknut (101). Make sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

17.Wrap the High Cable (63) over a 3 1/2” Pulley (56). Attach the Pulley to the indicated bracket on the Top Frame (5) with an M10 x 46mm Button Head Bolt (76) and an M10 Nylon Locknut (101).

18.Attach an end of the High Cable (63) to the other “U”-bracket (62) with an M6 Nylon Locknut (103).

Thread the Locknut onto the end of the Cable so that two threads show past the Locknut (see the inset drawing).

14
5	101
76
63	56
15
5	101
76
56	63
16
63	105 76
101
	56
	59
17
101
5
63
56	76
18
63	63
103
62	103
	62
10