![](/images/new-backgrounds/1145732/14573217x1.webp)
10.Wrap the High Cable (63) under a 3 1/2” Pulley (56). Attach the Pulley to the indicated bracket on the Base (1) with an M10 x 46mm Button Head Bolt (76) and an M10 Nylon Locknut (101).
11.Note: The following three steps show the sys- tem from the reverse side for clarity.
Wrap the High Cable (63) over a 3 1/2” Pulley (56). Attach the Pulley to the indicated bracket on the Top Frame (5) with an M10 x 46mm Button Head Bolt (76) and an M10 Nylon Locknut (101).
12.Wrap the High Cable (63) over a 3 1/2” Pulley (56). Attach the Pulley to the indicated bracket on the Top Frame (5) with an M10 x 46mm Button Head Bolt (76) and an M10 Nylon Locknut (101).
13.Wrap the High Cable (63) under a 3 1/2” Pulley (56), in the direction shown. Attach the Pulley to the bracket on the Top Weight (27) with an M10 x 46mm Button Head Bolt (76) and an M10 Nylon Locknut (101).
10 |
|
63 |
|
56 |
|
76 | 101 |
| Bracket |
| 1 |
11 |
|
5 |
|
101 |
|
76 |
|
63 |
|
56 |
|
12 |
|
| 5 |
76 | 63 |
56 | 101 |
| |
13 |
|
63 |
|
56 |
|
76 |
|
101 |
|
27 |
|
9 |
|