Frame Assembly
1.
Before beginning, read the information on page 5. This brief introduction will save you much more time than it takes to read it.
To help you identify the small parts used in assembly, we have included a PART IDEN- TIFICATION CHART in the center of this manual.
Attach the Weight Base (2) and the Stabilizer (96) to the Base (1) with two M10 x 96mm Button Head Bolts (77) and two M10 Nylon Locknuts (101). Do not tighten the Locknuts yet.
Insert two M10 x 68mm Carriage Bolts (73) into the Base (1).
2.Press a 50mm x 76mm Inner Cap (52) into the top of the Upright (4).
Attach the Upright (4) to the Base (1) with the two M10 x 68mm Carriage Bolts (73) and two M10 Nylon Locknuts (101). Do not tighten the
Locknuts yet.
3.Attach the Foot Plate (3) to the Weight Base (2) with two M10 x 92mm Button Head Bolts (90).
1 |
| |
2 | 101 | |
| ||
101 | 77 | |
| ||
| 73 | |
1 | 77 | |
96 | ||
| ||
2 | 52 | |
| ||
| 4 | |
| 101 | |
| 1 | |
| 73 | |
3 |
| |
| 3 | |
| 2 | |
| 90 | |
| 90 |
6
