Glossary 57

demultiplexing

The separating of different wavelengths in a wavelength-division multiplexing system. The opposite of multiplexing.

dispersion

The broadening of input pulses as they travel the length of an optical fiber. There are three major types of dispersion, as follows:

modal dispersion, which is caused by the many optical path lengths in a multimode fiber

chromatic dispersion, which is caused by the differential delay at various wavelengths in the optical fiber

waveguide dispersion, which is caused by light traveling through both the core and cladding materials in single-mode fibers

DWDM

dense wavelength division multiplexing

A technology that allows a large number of optical signals (usually 16 or more) with different wavelengths to be simultaneously transmitted in the same direction over one fiber, and then separated by wavelength at the distant end.

ESD

electrostatic discharge

Discharge of stored static electricity that can damage electronic equipment and impair electrical circuitry, resulting in complete or intermittent failures.

Ethernet

A local area network data link protocol based on a packet frame. Ethernet, which usually operates at 10 Mbit/s, allows multiple devices to share access to the link.

facility

Any provisional configuration that provides a transmission path between two or more locations without terminating or signalling equipment. Also, the logical representation of a transport signal.

Installation and Networking Guidelines for Optical Routing

Page 57
Image 57
Nortel Networks 10396EA, 10292FA manual Dwdm