Nortel Networks 2212, 2211, 2210 manual To select the Ring Tone

Chapter 2 WLAN Handsets overview 21

8Scroll to one of the desired options:

•Off — ringer is turned off.

•PBX — ringing uses the distinctive ringing pattern sent to the handset from the call server.

•Continuous — ringing is continuous.

•Short Pulse — ringing occurs in short bursts.

•Long Pulse — ringing occurs in long bursts.

9Press the Select button (or OK) to select the highlighted option.

10Do one of the following:

•Press UP to return to the previous menu and configure another option.

•Press to exit all menus and return to the standby state.

You can also press Exit from the top-level menu to exit the menu and return to the active (off-hook) state.

To select the Ring Tone

Note: Ring Tone is not displayed in the menu when Ring Cadence is turned off.

1Press when the handset is in the standby state.

2Press the Up and Down buttons to scroll through the menu and highlight Ring Options.

3Press the Select button (or OK) to select Ring Options.

4Press the Up and Down buttons to scroll through the menu and highlight Telephone Ring.

5Press the Select button (or OK) to select Telephone Ring.

6Press the Up and Down buttons to scroll through the menu and highlight Ring Tone.

7Press the Select button (or OK) to select Ring Tone.

8Scroll to one of the desired options:

•Tone 1

•Tone 2

•Tone 3

•Tone 4

•Tone 5

9Press the Play soft key to preview the tone.

WLAN IP Handset 2210/2211/2212 User Guide