Nortel Networks 2210, 2212, 2211 Configure push-to-talk, To configure Push-to-Talk for the handset

26 Chapter 2 WLAN Handsets overview

7Press the Select button (or OK) to select the highlighted setting.

8Do one of the following:

•Press UP to return to the previous menu and configure another option.

•Press to exit all menus and return to the standby state.

You can also press Exit from the top-level menu to exit the menu and return to the active (off-hook) state.

Configure push-to-talk

Push-to-talk is available on the WLAN Handset 2211 only.

Push-to-talk mode enables two-way radio communication with another WLAN Handset 2211 user. You can enable/disable Push-to-Talk mode and select a channel.

To configure Push-to-Talk for the handset

1Press when the handset is in the standby state.

2Press the Up and Down buttons to scroll through the menu and highlight Push-to-Talk.

3Press the Select button (or OK) to select Push-to-Talk.

4Press the Up and Down buttons to scroll through the menu and highlight Enable/Disable.

5Press the Select button (or OK) to select Enable/Disable.

6Press the Up and Down buttons to scroll through the menu and highlight one of the following settings:

•PTT Enable — Enables Push-to-Talk mode.

•PTT Disable — Disables Push-to-Talk mode. This is the default.

7Press the Select button (or OK) to select the highlighted option.

8Press the Up soft key to return to the previous menu.

9Press the Up and Down buttons to scroll through the menu and highlight Channel.

10Use the Up and Down buttons to scroll through the menu and highlight a channel (1 to 8).

11Press the Select button (or OK) to select the channel.

12Do one of the following:

•Press UP to return to the previous menu and configure another option.

•Press to exit all menus and return to the standby state.

You can also press Exit from the top-level menu to exit the menu and return to the active (off-hook) state.

NN40050-101