Nortel Networks BCM 1000 manual Appendix E, Using Element Manager to set the basic parameters

Appendix E Using Element Manager to set the basic parameters 45

Appendix E

Using Element Manager to set the basic parameters

The Element Manager application provides a computer-based client interface that can connect to devices over an IP network and display the programming interface for that device.

Through Element Manager, you can configure all of the basic parameters, which include:

•“Configuring the initial parameters” on page 47

•“Configuring the startup parameters” on page 50

Refer to the BCM 4.0 Administration Guide for more information on how to use Element Manager.

Figure 6 shows an overview of using Element Manager to set the basic parameters.

Figure 6 Overview of using Element Manager

BCM 4.0 for BCM1000 Installation and Maintenance Guide Addendum