Nortel Networks L12 user manual Sound Settings, Auto Off, 101, Adjust the following sound settings

Basic Camera Setup: The Setup Menu

h Sound Settings

Adjust the following sound settings:

Sound settings

Button sound

Shutter sound

Volume

MENU Exit

Button sound

When [On] (default setting) is selected, beep will sound once when operations are completed successfully, three times when error is detected.

Shutter sound

Choose shutter sound from [On] (default setting) and [Off].

Volume

Choose volume of shutter sound and start-up sound from [Loud], [Normal] (default setting), and [Off].

i Auto Off

To reduce the drain on the batteries, the monitor turns off and the camera enters standby mode, if no operations are performed for a certain period of time. The camera will turn off automatically if no operations are performed for three minutes after entering standby mode.

Auto off

Auto off Auto off Sleep mode

Exit

Shooting, Playback,

Choose the time allowed to elapse before the camera enters standby mode if no operations are performed from [30s] (default setting), [1m], [5m], and [30m].

Sleep Mode

If [On] (default setting) is selected, the camera will enter standby mode when there is no change in the brightness of the subject, even before the time selected in the auto off menu has elapsed.

The camera will enter sleep mode after 30 seconds when [Auto off] is set to [1m] or less, or after 1 minute when [Auto off] is set to [5m] or more.

•If no operations are performed for fifteen seconds when the auto off is set to [30s] and sleep mode is [On], the monitor turns off and the power-on lamp blinks. If no operations are performed for another fifteen seconds, the cam- era enters standby mode.

jAuto Off

and Setup Menus

Regardless of the option selected, the monitor will remain on for a minimum of three minutes
when menus are displayed, and for thirty minutes during a slide show.	101