Nortel Networks L12 Set the date and info options, Creating a Dpof Print Order Print Set

Creating a DPOF Print Order: Print Set

5 Set the date and info options.
	Print set
Press G or H to choose an option, and press d to
turn y on and enable that option. To turn y off,		Done
press d again.
• [Date]: Print the date of recording on all pictures in		Date
		Info
print order.
	MENU Exit

•[Info]: Print shutter speed and aperture on all pic-

tures in the print order. Note that this information is not printed with direct con- nection to a printer (c 68).

•[Done]: Complete the print order and exit.

Connecting to Televisions,

Pictures selected for printing are recognized by the w icon displayed with playback.

15/05/2007 15:30
0004.JPG
4/	4

Computers,

jPrint Set

[Date] and [Info] are reset each time the print set menu is displayed.

kDeleting All Print Orders

Choose [Delete print set] in step 3 and press d. Print orders for all pictures will be deleted.

and Printers

kNotes on the Print Set [Date] Option

The date and time printed on pictures with DPOF printing when [Date] in the print set menu is enabled are those recorded with the picture when it was taken. Date and time printed using this option are not affected when the camera’s date and time setting are changed from the setup menu after pictures are recorded.

15.05.2007

kDifferences Between Print Set and Date Imprint

Date and time can only be printed on pictures using the [Date] option in the print set menu when pictures are printed from a DPOF-compatible printer (c 125).

Use the [Date imprint] (c 98) option in the setup menu to print the date on pictures from a printer that does not support DPOF (position of the date is fixed at the bottom right hand cor- ner of the picture).

When the date option for both [Print set] and [Date imprint] is enabled, only the date from the [Date imprint] option is printed, even when a DPOF-compatible printer is used.

74