Nortel Networks L12 user manual Transferring Pictures to a Computer, Transfer pictures and movies

Connecting to a Computer

Transferring Pictures to a Computer

1 Turn on a computer to which PictureProject has been installed.

2 Turn the camera off and connect the USB cable as shown below.

3 Turn the camera on.

• At default PictureProject settings, PictureProject
Transfer is launched immediately with recognition	ON/OFF
of camera connection.

4 Transfer pictures and movies.

•Transfer using PictureProject

Click [Transfer] in PictureProject Transfer.

All pictures and movies marked for transfer are copied to the computer. Once transfer is complete, pictures are displayed in PictureProject.

•Transfer using E (d) on the camera

While PictureProject Transfer is launched, press E (d) on the camera to copy pictures marked for transfer (c 66) to the computer. The following messages are displayed in the camera monitor during transfer.

Preparing to transfer.	Transferring images to	Transfer completed.
	computer.

Connecting to Televisions, Computers, and Printers

jConnecting the USB Cable

•When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull the connector at an angle.

•Do not pinch the connector cover between the camera’s USB connector and the USB cable connector when connecting the cable to the camera.

•Connection may not be recognized when the camera is connected to a computer via a USB

hub. 65