14 Chapter 2 Entering keycodes on the BCM system
To add a keycode using telset administration interface:
1.Press Feature 9*8.
User ID:_
RETRY OK
Password:_
RETRY OK
Features Codes
NEXTOK
SID:
NEXT BACK
Sequence ID
NEXT CHNGE BACK
Features List
NEXT SHOW BACK
VM Seat
NEXT CHNGE BACK
Data:_
CHNGE BACK
Data:2
CANCL RETRY OK
Data:2
CHNGE BACK
VM Seat
NEXT CHNGE BACK
VM Seat
NEXT CHNGE BACK
Features List
NEXT SHOW BACK
Entitlement Code
NEXT SHOW BACK
1st:
NEXT CHNGE BACK
1st:
CANCL RETRY OK
2.Log on by following the voice prompts or the display button options.
3.Enter your password and press OK. The Features Codes display.
4.Press OK to continue.
The system ID (SID) displays.
5.Press NEXT.
6.Enter your Sequence ID, and press NEXT.
7.Press SHOW to scroll through the Features List and select the feature you want.
8.In this example, the feature is VM Seats. Press CHNGE to enter the feature data value.
The current feature data value displays.
9.Press CHNGE to enter the new feature data value. For example, if you have two voicemail seats, enter 2.
10.Enter the new feature data value. Press OK to accept the data feature value.
11.The new feature data value displays. Press BACK to return to the feature.
12.Press NEXT to scroll through the feature list and select the feature you want. Repeat steps above to add more features.
Add all features and feature data values before you enter the keycode.
13.After you add all of the features you have purchased, press BACK. The Features List displays.
14. Press NEXT to continue to the Entitlement Code display.
15.Press SHOW to enter the keycode.
The keycode is a
16.Press CHNGE to enter the first eight digits of the keycode.
17.Enter the first eight digits of the keycode and press OK.
