Nortel Networks Confidential | Fault management 23 |
|
|
2If the alarm persists, the number of available ports per blade (card) and/or the number of blades (cards) in the system must be increased. To increase the number of ports or the number of blades, contact your next level of support.
Clearing the RTP105 Alarm (Private Port Usage)
1Wait for at least two audit cycles to see if the alarm is cleared automatically. An audit cycle has a duration defined by the “Idle Session Audit Period” property.
2If the alarm persists, the number of available ports per blade (card) and/or the number of blades (cards) in the system must be increased. The recommended maximum ports per blade is 300.
3If it is not possible to increase the number of ports or the number of blades, contact your next level of support.
Logs
System logs are discussed in detail in the MCP Management Module Basics.
Copyright © 2003, Nortel Networks | MCP RTP Media Portal Basics |
