Nortel Networks Confidential | Overview 9 |
|
|
Figure 5 Signaling and OAM interface - CPV5370 Host CPU
The rear transition module for the CP5370 Host Central Processing Unit (CPU) card contains the following:
•COM2 port for connection to a terminal server and local monitor.
•Two Ethernet ports which provide connectivity to the Private Network. The connection carries signaling and OAM data.
—The Ethernet 1 port is always used to provide an active connection.
—The Ethernet 2 port provides a standby connection. The standby ethernet function is enabled by default through the “Activate IP Failover” property when configuring the RTP Media Portal. (See Table 2, “RTP Media Portal tab configurable properties,” on page 33.)
These Ethernet connections carry the following:
•MGCP+ signaling to communicate with the SIP Application Module.
•operations, administration and maintenance (OAM) data to the Management Module.
Copyright © 2003, Nortel Networks | MCP RTP Media Portal Basics |
