Displaying Pictures with the Projector (Projector Mode)
5Switch the picture with the remote control (supplied).
Point the remote control at the infrared receiver on the front or rear of the camera (A4, 5) within a distance of approximately 5 m (16 ft.).
projector the Using
164
Infrared emitter | Infrared receiver | Display the previous picture |
Display the next picture
See “Using Projector Mode” (A166) for the details of the operation of the remote control.
6Press the Pbutton on the remote control to end projection.
Projection also ends if the Pbutton or Abutton on the camera is pressed to switch to shooting mode.
BNotes on Using the Projector
•Be sure to read and follow the projector warnings on page iv.
•Be aware that the camera and battery will become hot in projector mode. Allow the camera to cool before using it again when the projector has been used for an extended period of time.
•When the battery is low, the camera automatically adjusts projection brightness to save power.