Changing the Projecting Settings
Pbutton (projector mode) MTap the bottom tab MbSlide show
Project pictures stored in the internal memory or on the memory card as an automated slide show.
1 Check the camera position and focus with the |
|
|
|
|
Slide show |
|
|
| |
standby screen. | 4 | 4 |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
Follow steps 3 and 4 under “Projecting Pictures” (A163)
to adjust camera position and focus.
Tap w(View selected images) on the monitor to select
and play back the pictures as a slide show in projector mode (A170).
Tap x(Effects), y(Frame intvl), z(Background music), or X(volume) to change each setting (A171).
To repeat slide show automatically, tap m(loop playback).
2 Press the bbutton on the remote control.
When the bbutton on the remote control is pressed without displaying the standby screen in step 1, the slide show begins with the previously made settings.
The operations described in step 3 to 4 can also be performed with the operation controls on the camera’s monitor or the gand fzoom controls.
3The slide show begins.
While the slide show is in progress, press the Kbutton on the remote control to display the next picture or the J button to display the previous picture. Hold down the buttons to advance or rewind the slide show.
Press the apply selection button to pause the slide show, or press the bbutton to end it.
During a slide show with Background music, the volume can be adjusted with the g(+) or
4End or resume the slide show.
When the slide show ends or is paused, press the bbutton to return to the screen shown in step 1. Press the apply selection button to resume the slide show.
projector the Using
169