Nortel Networks S1100PJ Error Messages

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display	Problem		Solution	A
O(blinks)	Clock not set.	Set date and time.		145
B	Battery running low.	Prepare to charge or		18, 20
		replace battery.
N	Battery exhausted.	Charge or change battery.		18, 20
Battery exhausted.
		Turn off camera, and allow
		battery to cool down
		before resuming use. After
		five seconds, this message
		will disappear, the monitor
P	Battery temperature is	will turn off, and the
Battery temperature		power-on lamp will blink		21
	high.
high		rapidly. After the lamps
		blink for three minutes, the
		camera will turn off
		automatically. Pressing the
		power switch also turns off
		the camera.
P		The camera turns off
	The camera has become	automatically. Leave the
The camera will turn
	hot due to the heat of the	camera off until it has		164
off to prevent
	projector.	cooled and then turn it on			Technical
overheating.
		again.
		•	Refocus.	30, 31
Q(● blinks red)	Camera cannot focus.	•	Focus on another	46	Notes
			subject positioned at the
			same distance from the		and
			camera as the intended
			subject.		Index
P	Camera cannot perform	Wait until message clears
Please wait for the		from display automatically
	other operations until			–
camera to finish		when recording is
	recording is complete.
recording.		complete.
u	Write-protect switch is in	Slide write-protect switch
Memory card is write				25
	“lock” position.	to “write” position.
protected.

181