Changing the Projector Settings (Projector Settings Menu)

kAuto Off

Pbutton (projector mode) MTap the bottom tab Mz(Projector settings menu) M kAuto off

If no operations are performed for a while during projection, camera ends projection and enters standby mode (A21) for saving the power.

In this option, set the time allowed to elapse before the camera enters standby mode.

30 s, 1 min, 5 min (default setting), and 30 min can be selected.

CCanceling Standby Mode

•When the camera enters standby mode from projector mode, press the power switch, shutter- release button or cbutton to activate playback mode.

•Press the Abutton to activate shooting mode.

•To resume projection, press the Pbutton again in playback mode or shooting mode.

CNotes on Auto Off

The time allowed to pass before the camera enters standby mode is fixed as follows:

•During slide show playback with the loop option enabled: 30 minutes

•When a setting screen or the projector settings menu is displayed: three minutes

Tone Compensation

Pbutton (projector mode) MTap the bottom tab Mz(Projector settings menu) M Tone compensation

Dark portions of pictures are brightened when projected.

On (default setting)

Dark portions of pictures are brightened when projected. The results of tone compensation vary depending on the picture.

Off

Tone compensation is disabled.

projector the Using

173