Connecting to a Printer
1 Turn off the camera.
2 Turn on the printer. Check printer settings.
3 Connect the camera to the printer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an angle, and do not use force when connecting or disconnecting the USB cable.
Printers and Computers, Televisions, to Connecting
4 The camera is automatically turned on.
When properly connected, the PictBridge startup screen
(1) will be displayed in the camera monitor, followed by the Print selection screen (2).
12 Print selection
15/11
2010
NO . 32 3 2
BIf the PictBridge Startup Screen Is not Displayed
Turn the camera off and disconnect the USB cable. Set the Charge by computer option (A136) |
|
in the camera’s setup menu to Off and reconnect the cable. | 115 |
|