Troubleshooting
Index and Notes Technical
Problem | Cause/Solution | A | |
| • If camera clock has not been set, “Date not set” | 18, | |
| indicator blinks with shooting and movie recording. | 123 | |
| Images and movies saved before clock is set are |
| |
Date and time of | dated “00/00/0000 00:00” or “01/01/2010 00:00” |
| |
recording are not correct. | respectively. Set the correct time and date from the |
| |
| Date option in the setup menu. |
| |
| • Check camera clock regularly against more accurate | 123 | |
| timepieces and reset as required. |
| |
No indicators displayed | Hide info is selected for Photo info. | 126 | |
in monitor. | Select Show info. | ||
| |||
Date imprint not | Camera clock has not been set. | 18, | |
available. | 123 | ||
| |||
Date not imprinted on | • The current shooting mode is one that does not |
| |
images even when Date | support Date imprint. | 128 | |
imprint is enabled. | • The date cannot be imprinted on movies. |
| |
Screen for setting date |
|
| |
and time is displayed | Clock battery is exhausted; all settings were restored to | 18, | |
when camera is turned | |||
their default values. | 124 | ||
on. | |||
|
| ||
|
|
| |
Camera settings reset. |
|
| |
|
|
| |
| Battery temperature is high. Turn off camera and allow |
| |
Monitor turns off, and | battery to cool down before resuming use. After the |
| |
the | lamp blinks for three minutes, the camera will turn off | 17 | |
blinks rapidly. | automatically. Pressing the power switch also turns off |
| |
| the camera. |
|
Electronically Controlled Cameras
In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the battery, then turn the camera on again. In the event of continued malfunction, contact your retailer or
152