Step 2 Frame a Picture
Use the zoom control to activate optical zoom. Rotate | Zoom out Zoom in |
the zoom control to gto zoom in so that the subject |
|
fills a larger area of the frame, or fto zoom out, thus |
|
increasing the area visible in the frame. |
|
•When the camera is turned on, the zoom is at the
widest position.
• A zoom indicator is displayed at the top of the monitor when the zoom control is rotated.
Optical Digital zoom zoom
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating and holding the zoom control at gtriggers digital zoom.
Digital zoom can magnify the subject up to about 2× beyond the maximum magnification of the optical zoom.
Maximum optical zoom | Digital zoom enabled |
•The camera focuses at the center of the frame and the focus area is not displayed when digital zoom is in effect.
CDigital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify images, resulting in slight deterioration of picture quality according to the image mode (A37) and digital zoom magnification.
Interpolation is applied at zoom positions beyond Vwhen taking still images.
When zoom is increased beyond the Vposition, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation is being applied.
The position of Vmoves to the right as image size decreases, allowing for confirmation of the zoom positions at which shooting without interpolation is possible at the current image mode setting.
Small image size
•Digital zoom can be disabled from the Digital zoom option (A131) in the setup menu (A120).
Mode (Auto) APlayback: and Photography Basic
25