NetComm Liberty Series - 3G Travel Router t1
Network and System Requirements
Before continuing with the installation of your 3G Travel Router t1, please confirm that you comply with the minimum system requirements below.
•Compatible 3G USB Modem with Active SIM/Data Service if you want to use 3G Broadband service.
Note: Subject to terms and conditions from your 3G Mobile Broadband Service Provider.
•Computer with Windows, Macintosh, or
Protocol installed.
•A web browser such as Internet Explorer, Netscape Navigator, Mozilla Firefox, Opera, Safari etc.
Wireless Computer System Requirements
•Computer with a working IEEE 802.11b, 802.11g or 802.11n wireless adapter.
Modem Requirements
In order to use the WAN Ethernet port for Internet connectivity your fixed line service (Cable/xDSL/Satellite) modem must be equipped with an RJ45 Ethernet port. Many modems have both an RJ45 Ethernet port and a USB port. If you have a modem with both Ethernet and USB, and are using the USB port at this time, you will be instructed to use the RJ45 Ethernet port during the installation procedure. If your modem has only a USB port, you can request a different type of modem from your Internet Service Provider, or you can purchase a modem that has an RJ45 Ethernet port on it.
Connecting your device to the Router
Follow the next steps to create a Wireless Local Area Network (WLAN) to provide Internet access to 802.11b, 802.11g and 802.11n
computers or smartphones
Step 1 – Connect the 3G USB Modem.
Plug the 3G USB modem into the USB port.
3G USB Modem
Note: The 3GT1Wn - 3G Travel Router t1 is designed to work with 3G USB Dongles that can be used as data modems (support tethered data). Please refer to your service provider for detailed feature information. Please refer to the NetComm website for a list of compatible 3G USB Modems
Charging your battery
If you use the 3G Router until the battery has completely drained, it will power off. If this occurs, let the unit charge overnight.
Note: The battery must be fully charged before using your 3G Router for the first time.
To charge your battery please complete the following steps:
1.With the battery inserted into your 3G Router connect the supplied power adapter to the wall power outlet and to the micro USB socket on the
3G Router.
2.Leave it to charge until the power LED lights up solid Green.
Step 2 – Plug in the power
Connect the power adapter to the port on the back panel of your 3G Router. Then plug the other end of the power adapter into a wall outlet or power strip.
| Power Adapter |
|
|
YMLt1T�N | 3G tTravel rRouter t1 User Guide |
www.netcomm.com.au | 11 |
