The LED Indicators of the 3G Travel Router t1
The Router has been designed to be placed on a desktop. The LED indicators are easily visible on the top of the Router to provide you with information about network activity and status. See below for explanation of each of the features.
LED | Icon | Description | |
|
|
|
|
Power |
|
| Lights up when powered ON. |
|
| ||
|
|
|
|
3G |
|
| Lights up when the router is connected via 3G. |
|
|
|
|
Wireless |
|
| Lights up when WLAN is enabled. Blinks on traffic. |
|
|
|
|
WAN / LAN |
|
| Light up when specific Ethernet connection is established, Blinks on WAN / LAN traffic |
|
|
| and Blinks on Temporarily overridden to LAN mode. |
|
|
|
|
The Power LED - Displaying Power and Battery Status
When Router is switched on and battery inside
Green: | power adapter is pluggedin and battery is fully charged |
|
|
Green in flashing: | power is provided by battery |
|
|
Amber: | power adapter is plugged in and charging the battery |
|
|
RED: | Battery power is low |
|
|
When device is on without battery inside |
|
|
|
Amber: | Power adapter is plugged in |
|
|
When device is off and with battery inside |
|
|
|
Amber: | power adapter is plugged in and charging the battery |
|
|
The Connectors and Buttons of the 3G Travel Router t1
Side Ports
Reset | Press once to initiate LAN port function. Hold this button down for 10 seconds to reset to factory |
| defaults. |
|
|
WPS Button | Press once to initiate Wireless Protected Setup |
|
|
3G USB | USB port for connecting a compatible 3G USB Modem |
Modem |
|
|
|
WAN / LAN | RJ45 WAN Ethernet port for a Fixed Line (ADSL/Cable/Satellite) network connection (factory |
| default) or LAN port for wired Ethernet clients (computers, laptops etc.) |
|
|
Power | Power connector, connects to DC 5V 2A Power Adapter |
|
|
3G Travel Router t1 User Guide | ymYMLt1T �WN |
10 | www.netcomm.com.au |
