NetComm Liberty Series - 3G Travel Router t1
DHCP (Auto config)
This connection will get the IP address from the Internet service provider. Choose this connection if you are connecting the router to a Cable Modem service. Leave everything as default unless instructed by your Internet Service Provider.
Name | Description |
|
|
Hostname | Please input the host name of your computer. This is optional, and only required if your service provider asks you to do |
| so. |
|
|
MAC Clone | Please input the MAC address of your computer here if your service provider only permits computers with a certain |
| MAC address to access the Internet. If you are using the computer which used to connect to Internet via a cable |
| modem, you can simply press the ‘Default’ button to fill the MAC address field with the MAC address of your computer. |
|
|
Click Apply to save the settings.
PPPoE (ADSL)
Most ADSL services use the PPP over Ethernet protocol. Use this if you connect your 3G Router to a bridged ADSL modem.
Name | Description |
|
|
Username/Password | Type in your PPPoE account username and password. |
|
|
Operation Mode; There are 3 options: | |
|
|
‘Keep Alive’ | Keeps the Internet connection alive, does not disconnect. |
|
|
‘On Demand’ | Only connects to the Internet when there’s a connect attempt |
|
|
‘Manual’ | Only connects to the Internet when the ‘Connect’ button on this page is pressed, and disconnects when the |
| ‘Disconnect’ button is pressed. |
|
|
MAC Clone | Please input the MAC address of your computer here if your service provider only permits computers with |
| a certain MAC address to access the Internet. If you are using the computer which used to connect to the |
| Internet via cable modem, you can simply press the ‘Default’ button to fill the MAC address field with the MAC |
| address of your computer. |
|
|
Click Apply to save the settings.
YMLt1T�N | 3G tTravel rRouter t1 User Guide |
www.netcomm.com.au | 19 |
