Quickstart Guide
Northstar
IMPORTANT SAFETY INFORMATION Please read carefully before use
Important Safety Information
must be resolved before proceeding any further
NOTES Limits apply to exposure within the vertical beam angle
Disclaimer
Warranty
Introduction to the Northstar
Welcome to the Northstar
Get started with Northstar
Contents
Man Overboard
1.1 Networking the
1 Welcome to the Northstar
1.3 Conventions
1.2 How to use this manual
Northstar 8000i Quickstart Guide
Text written like Chart refers to the names of keys and buttons
2.1 Turn on the
2 Introduction to the Northstar
2.3 The keys on the 15 inch Monitor
2.2 Turn off the
Function when NOT in
Function in OSD mode
H Infrared Receiver
2.4 The keys on the remote keypad
K Mounting Bezel
DISPLAY
4 directional arrows
2.5 The keys on the 12 inch Display Processor
2.6 The buttons
2.7 How to select an item
2.8 Single pane options
2.10 What are pages?
2.9 What is the active pane?
2.11 Expand a small pane
2.12 Cycle through the panes on a page
2.14 Adjust the brightness on a 12 inch Display Processor
2.13 Select a page
Sounder, Cruising, and Fishing
2.16 Adjust the volume
2.15 Adjust the brightness on the 15 inch Monitor
2.17 Select a palette
3.2 What does the chart screen show?
3.1 Display the chart screen
3 Get started with Northstar
3.5 Zoom in or out on a chart screen
3.4 Pan the chart
3.3 Display your current position in real time
3.7 Instant GoTo
3.6 Zoom in or out on part of a chart screen
3.9 Overlay the radar
3.8 Show range and bearing from your vessel
GoTo Here
3.11 Create an event mark
3.10 Create a waypoint
Transmit
3.13 Stop navigating to a waypoint
3.12 Navigate to a waypoint
3.14 Create a new route
Create Route button, select Waypoints, Routes & Tracks
2. Select Create Route
3.15 Move a waypoint in a route
Waypoints Routes & Tracks button, select Return
2. Select Waypoints Routes & Tracks
3.16 Add a new waypoint into a route
Waypoints Routes & Tracks button, select Return
2. Select Waypoints Routes & Tracks
3.18 Select and follow a route with GoTo
3.17 Add a waypoint to the start or end of the route
Waypoints Routes & Tracks button, select Return
2. Select Waypoints Routes & Tracks
3.21 Display the 3D Chart screen
3.20 Introduction to 3D Chart
3.19 Stop following a route
3.23 3D Steer
3.22 Reposition the 3D Chart screen to show your vessel
3.24 Display the 3D Steer screen
3.25 The sounder
3.27 Change the range
3.26 Change the sounder operating mode
Auto Mode button, select Return
3.29 What are the radar modes?
3.28 Radar
Range, Zoom and Split button, select Return
3.31 Start the radar transmitting
3.30 Display the radar screen
3.32 Stop the radar transmitting
3.33 What does the radar screen show?
3.34 Change the range of the radar
3.36 Change the radar gain mode
3.35 Optimize the quality of the radar display
2. Select Adjust Radar
3.38 What is sea clutter?
3.37 Change the radar gain setting
3.39 Change the sea clutter mode
2. Select Adjust Radar
2. Select Adjust Radar
3.40 Change the sea clutter setting
2. Select Adjust Radar
3.41 Entertainment
3.43 Select and play music from the jukebox
3.42 Turn the volume up or down
3.45 Select and play a video
3.44 Play a music CD
3.47 Select and play the Video Aux In source
3.46 Play a DVD
select GoTo then select Cancel GoTo Waypoint, or
4 Man Overboard
select the MOB waypoint, then select Cancel GoTo Waypoint
EUROPE
UNITED STATES
30 Sudbury Road
Unit 2, Ocean Quay
Quickstart Guide
Northstar
Made in New Zealand MN000643D-G