G | VESSEL | Press to return to the selected vessel offset position on your Chart |
|
| screen (Look Ahead or Center) or to remove any offset on your |
|
| Radar screen. |
|
|
|
H | IN | Press once to zoom in one step. |
|
|
|
I | OUT | Press once to zoom out one step. |
|
|
|
J | MARK | Press to mark the current position with a default event mark icon. |
|
|
|
K | MOB | Press to activate the Man Overboard sequence. |
|
|
|
L | VOL | Press to adjust the volume of the audio that you're playing. |
|
|
|
M | ALARM | Press to show the alarm log and to set up the alarms. |
|
|
|
N | Power | Press to power On. Hold down for about ten seconds to power Off. |
|
|
|
2.6The buttons
Buttons are displayed graphically on the screen. There are two groups of buttons:
•
•
Page buttons are shown along the bottom of the screen. Just select a button to show that function or page.
Control panel buttons are shown down the right hand side of the screen when a function is active. The names of the buttons will vary, depending on the function that you're using. Use these buttons to manage the function.
NOTE: If you can't see the buttons because a pane has been set to maximum view
(for example, when you're viewing a video or DVD) just touch anywhere on the screen or select Control to
2.7How to select an item
To select an item with the touch screen:
1.Just touch the item gently on the screen. To select an item with the remote keypad:
1.Use the cursor control pad to move to the item you want to select, then press the confirm bar.
2.8Single pane options
You can use the 8000i to view a single function, such as the Chart screen, in one single pane that takes up the whole screen.
To see the choice of full size, single pane screens:
1.Select Display to see the single pane screen functions available on your 8000i.
16 | Northstar 8000i Quickstart Guide |
