The 8000i displays the Waypoint Details box with some details already entered for the event mark.
4.The new waypoint is stored in the Waypoint Library.
3.12Navigate to a waypoint
Use this when there's a waypoint on the Chart screen.
To navigate to a waypoint that's shown:
1.Display the Chart screen and the control panel.
2.Select the waypoint then select GoTo Waypoint. This becomes the active waypoint.
3.The 8000i creates a temporary waypoint at your current position, then draws a line between the temporary waypoint and the active waypoint.
To navigate to a waypoint that's not shown:
1.Display the Chart screen and the control panel. If you can't see the GoTo button, select Return.
2.Select GoTo then select GoTo Waypoint.
3.Choose the destination waypoint from the Waypoints Library and select OK. This becomes the active waypoint.
4.The 8000i creates a temporary waypoint at your current position, then draws a line between the temporary waypoint and the active waypoint.
3.13Stop navigating to a waypoint
This works only when you are navigating to a waypoint on the Chart screen. 
To stop navigating to a waypoint:
1.Select GoTo, then select Cancel GoTo Waypoint. The 8000i immediately deactivates the waypoint.
Alternatively:
1.Select the waypoint, then select Cancel GoTo Waypoint. The 8000i immediately deactivates the active route.
3.14Create a new route
You can create a new route even when there's an active route or waypoint already on the Chart screen. You can pan or zoom the chart while you are creating a new route.
If you want to create a new route that is similar to an existing route, just copy the existing route.
To create a new route:
1.Display the Chart screen and the control panel. If you can't see the
Create Route button, select Waypoints, Routes & Tracks.
26 | Northstar 8000i Quickstart Guide |
