Quickstart Guide
Northstar
IMPORTANT SAFETY INFORMATION Please read carefully before use
Important Safety Information
must be resolved before proceeding any further
NOTES Limits apply to exposure within the vertical beam angle
Disclaimer
Warranty
Contents
Welcome to the Northstar
Introduction to the Northstar
Get started with Northstar
Man Overboard
1.1 Networking the
1 Welcome to the Northstar
1.3 Conventions
1.2 How to use this manual
Northstar 8000i Quickstart Guide
Text written like Chart refers to the names of keys and buttons
2.1 Turn on the
2 Introduction to the Northstar
Function in OSD mode
2.2 Turn off the
2.3 The keys on the 15 inch Monitor
Function when NOT in
2.4 The keys on the remote keypad
H Infrared Receiver
K Mounting Bezel
DISPLAY
4 directional arrows
2.5 The keys on the 12 inch Display Processor
2.7 How to select an item
2.6 The buttons
2.8 Single pane options
2.10 What are pages?
2.9 What is the active pane?
2.11 Expand a small pane
Sounder, Cruising, and Fishing
2.14 Adjust the brightness on a 12 inch Display Processor
2.12 Cycle through the panes on a page
2.13 Select a page
2.15 Adjust the brightness on the 15 inch Monitor
2.16 Adjust the volume
2.17 Select a palette
3.1 Display the chart screen
3.2 What does the chart screen show?
3 Get started with Northstar
3.4 Pan the chart
3.5 Zoom in or out on a chart screen
3.3 Display your current position in real time
3.7 Instant GoTo
3.6 Zoom in or out on part of a chart screen
3.8 Show range and bearing from your vessel
3.9 Overlay the radar
GoTo Here
3.10 Create a waypoint
3.11 Create an event mark
Transmit
Create Route button, select Waypoints, Routes & Tracks
3.12 Navigate to a waypoint
3.13 Stop navigating to a waypoint
3.14 Create a new route
3.15 Move a waypoint in a route
2. Select Create Route
Waypoints Routes & Tracks button, select Return
2. Select Waypoints Routes & Tracks
3.16 Add a new waypoint into a route
2. Select Waypoints Routes & Tracks
Waypoints Routes & Tracks button, select Return
2. Select Waypoints Routes & Tracks
3.17 Add a waypoint to the start or end of the route
3.18 Select and follow a route with GoTo
Waypoints Routes & Tracks button, select Return
3.20 Introduction to 3D Chart
3.21 Display the 3D Chart screen
3.19 Stop following a route
3.25 The sounder
3.22 Reposition the 3D Chart screen to show your vessel
3.23 3D Steer
3.24 Display the 3D Steer screen
3.26 Change the sounder operating mode
3.27 Change the range
Auto Mode button, select Return
3.28 Radar
3.29 What are the radar modes?
Range, Zoom and Split button, select Return
3.33 What does the radar screen show?
3.30 Display the radar screen
3.31 Start the radar transmitting
3.32 Stop the radar transmitting
3.34 Change the range of the radar
3.35 Optimize the quality of the radar display
3.36 Change the radar gain mode
2. Select Adjust Radar
2. Select Adjust Radar
3.37 Change the radar gain setting
3.38 What is sea clutter?
3.39 Change the sea clutter mode
3.40 Change the sea clutter setting
2. Select Adjust Radar
2. Select Adjust Radar
3.41 Entertainment
3.43 Select and play music from the jukebox
3.42 Turn the volume up or down
3.45 Select and play a video
3.44 Play a music CD
3.47 Select and play the Video Aux In source
3.46 Play a DVD
4 Man Overboard
select GoTo then select Cancel GoTo Waypoint, or
select the MOB waypoint, then select Cancel GoTo Waypoint
Unit 2, Ocean Quay
UNITED STATES
EUROPE
30 Sudbury Road
Northstar
Quickstart Guide
Made in New Zealand MN000643D-G