Quickstart Guide
Northstar
IMPORTANT SAFETY INFORMATION Please read carefully before use
Important Safety Information
must be resolved before proceeding any further
NOTES Limits apply to exposure within the vertical beam angle
Disclaimer
Warranty
Contents
Welcome to the Northstar
Introduction to the Northstar
Get started with Northstar
Man Overboard
1.1 Networking the
1 Welcome to the Northstar
1.3 Conventions
1.2 How to use this manual
Northstar 8000i Quickstart Guide
Text written like Chart refers to the names of keys and buttons
2.1 Turn on the
2 Introduction to the Northstar
Function in OSD mode
2.2 Turn off the
2.3 The keys on the 15 inch Monitor
Function when NOT in
K Mounting Bezel
2.4 The keys on the remote keypad
H Infrared Receiver
DISPLAY
4 directional arrows
2.5 The keys on the 12 inch Display Processor
2.8 Single pane options
2.7 How to select an item
2.6 The buttons
2.10 What are pages?
2.9 What is the active pane?
2.11 Expand a small pane
Sounder, Cruising, and Fishing
2.14 Adjust the brightness on a 12 inch Display Processor
2.12 Cycle through the panes on a page
2.13 Select a page
2.17 Select a palette
2.15 Adjust the brightness on the 15 inch Monitor
2.16 Adjust the volume
3 Get started with Northstar
3.1 Display the chart screen
3.2 What does the chart screen show?
3.3 Display your current position in real time
3.4 Pan the chart
3.5 Zoom in or out on a chart screen
3.7 Instant GoTo
3.6 Zoom in or out on part of a chart screen
GoTo Here
3.8 Show range and bearing from your vessel
3.9 Overlay the radar
Transmit
3.10 Create a waypoint
3.11 Create an event mark
Create Route button, select Waypoints, Routes & Tracks
3.12 Navigate to a waypoint
3.13 Stop navigating to a waypoint
3.14 Create a new route
Waypoints Routes & Tracks button, select Return
3.15 Move a waypoint in a route
2. Select Create Route
2. Select Waypoints Routes & Tracks
3.16 Add a new waypoint into a route
2. Select Waypoints Routes & Tracks
Waypoints Routes & Tracks button, select Return
2. Select Waypoints Routes & Tracks
3.17 Add a waypoint to the start or end of the route
3.18 Select and follow a route with GoTo
Waypoints Routes & Tracks button, select Return
3.19 Stop following a route
3.20 Introduction to 3D Chart
3.21 Display the 3D Chart screen
3.25 The sounder
3.22 Reposition the 3D Chart screen to show your vessel
3.23 3D Steer
3.24 Display the 3D Steer screen
Auto Mode button, select Return
3.26 Change the sounder operating mode
3.27 Change the range
Range, Zoom and Split button, select Return
3.28 Radar
3.29 What are the radar modes?
3.33 What does the radar screen show?
3.30 Display the radar screen
3.31 Start the radar transmitting
3.32 Stop the radar transmitting
3.34 Change the range of the radar
2. Select Adjust Radar
3.35 Optimize the quality of the radar display
3.36 Change the radar gain mode
2. Select Adjust Radar
3.37 Change the radar gain setting
3.38 What is sea clutter?
3.39 Change the sea clutter mode
2. Select Adjust Radar
3.40 Change the sea clutter setting
2. Select Adjust Radar
3.41 Entertainment
3.43 Select and play music from the jukebox
3.42 Turn the volume up or down
3.45 Select and play a video
3.44 Play a music CD
3.47 Select and play the Video Aux In source
3.46 Play a DVD
select the MOB waypoint, then select Cancel GoTo Waypoint
4 Man Overboard
select GoTo then select Cancel GoTo Waypoint, or
Unit 2, Ocean Quay
UNITED STATES
EUROPE
30 Sudbury Road
Made in New Zealand MN000643D-G
Northstar
Quickstart Guide
