![](/images/new-backgrounds/1135507/13550757x1.webp)
Speed and temperature sensor setup
sequence number restarts at 00, and the oldest waypoints with this same name will be overwritten (unless they have been renamed).
To turn this feature on or off, or to change the maximum number of each of these waypoints:
1.Press the CURSOR PAD up or down to highlight the waypoint type you want to change:
The line “*Fish##*:” controls fish waypoints
The line “*Therm##*:” controls temperature waypoints
The line “Mark Wpts:” controls waypoints marked by the user
2.Press EDIT.
3.Press the CURSOR PAD left or right to highlight the desired number of waypoints to be saved.
4.Press ACCEPT.
These functions are set during installation. The calibrations should not be changed unless they are known to need adjustment.
From the ECHO SOUNDER SETUP screen, press SPEED/TEMP to access the SENSOR SETUP screen.
961/962 sensor setup screen
491 Echo Sounder Operations Manual | Page 25 |