I. PREPARATION
B. Assembly
The compact Masonry saws are shipped completely assembled and ready for use except for diamond blade, gasoline, oil, and Head Locking Bar. Inspect the saw for shipping damage. If any damage is found, contact the shipper immediately and file a freight claim.
The Norton Company is not responsible for any
Remove the saw from the pallet.
Items Included with the saw:
Item | Part Number | QTY |
Head Locking Handle | 82738 | 1 |
Depth Limit Assembly |
| 1 |
Legs Set of 4 | 75817 | 1 |
Conveyor Cart Assembly | 83754 | 1 |
83892 |
| |
Water Curtain Assembly | 75128 | 1 |
Wrench 19 mm | 70807 | 1 |
Wrench 22mm | 72143 | 1 |
Water Pump Assembly | 72305 | 1 |
14” Genuine Norton Diamond Blade for Brick And Block | 7499 | 1 |
Head Locking Handle:
Remove the Head Locking Screw from the machine (see Figure: Head Locking Screw Removal). Replace the Head Locking Screw with the Head Locking Handle located in the plastic bag of accessories (see Figure: Head Locking Handle Installation). Read and understand the remaining sections of this Owners Manual.
The Head Locking Handle is used to lock the cutting head at a set position or depth of cut. The Head Locking Screw is only used to hold the Cutting Head of the machine in place at the Norton Company Factory.
Do not install the blade until it is time to use the saw!
ANSI regulations prohibit the transportation of any concrete saw with the blade installed!
7
